Arcam AVR350 manual Command 0x50 0x43 0x5f 0x33 0x31 0x31 0x0d, Decode mode - two-channel, English

Direct mode / Mode Direct / Direktmodus / Modus Direct

g Change the stand-by state of a zone. f Modifiez l’état de veille d’une zone.

d Ändern des Stand-by-Zustands einer Zone. n De standby-status van een zone wijzigen.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to switch ‘Direct mode’ on: f Séquence commande/réponse pour activer le mode Direct : d Befehls-/Rückmeldesequenz zur Aktivierung des Direktmodus: n Opdracht- en responsreeks om modus Direct in te schakelen:

Command: 0x50 0x43 0x5f 0x33 0x31 0x31 0x0d

Response: 0x41 0x56 0x5f 0x33 0x50 0x31 0x31 0x0d

Command:

Byte: Description:

CC‘3’ (0x33) (Command code)

P1 ‘1’ (0x31) – Zone 1

P2	Request:
	‘0’ (0x30) – Set ‘Direct Mode’ off
	‘1’ (0x31) – Set ‘Direct Mode’ on
	‘9’ (0x39) – Request mode setting
Response:
Byte:	Description:
RC	‘3’ (0x33) (Reply Code)
AC	Answer code
P1	‘1’ (0x31) – Zone 1
P2	Response:
	‘0’ (0x30) – ‘Direct mode’ is off
	‘1’ (0x31) – ‘Direct mode’ is on

English

Decode mode – two-channel /

Mode de décodage – deux canaux /

Dekodiermodus – Zweikanal /

Decoderingsmodus – tweekanaals

g Set the decode mode for two-channel material.

f Réglez le mode de décodage pour le matériau à double canal.

d Einstellen des Dekodiermodus auf Zweikanalmaterial.

n De decoderingsmodus voor tweekanaals materiaal instellen.

Example / Exemple / Beispiel / Voorbeeld

g Command/response sequence to change the decode mode to Pro Logic IIx Movie Mode:

f Séquence commande/réponse pour remplacer le mode de décodage par le mode Pro Logic IIx Movie :

d Befehls-/Rückmeldesequenz zur Änderung des Dekodiermodus in den Modus „Pro Logic IIx Movie‘:

n Opdracht- en responsreeks om de decoderingsmodus te wijzigen naar de modus Pro Logic IIx Movie:

Command: 0x50 0x43 0x5f 0x34 0x31 0x33 0x0d

Response: 0x41 0x56 0x5f 0x34 0x50 0x31 0x33 0x0d

Command:

Byte: Description:

CC‘4’ (0x34) (Command code)

P1 ‘1’ (0x31) – Zone 1

P2 ‘.’ (0x2e) – Mono ‘/’ (0x2f) – Stereo

‘0’ (0x30) – Pro Logic II Movie Mode ‘1’ (0x31) – Pro Logic II Music Mode ‘3’ (0x33) – Pro Logic IIx Movie Mode ‘4’ (0x34) – Pro Logic IIx Music Mode ‘6’ (0x36) – Dolby Pro Logic Emulation ‘7’ (0x37) – Neo:6 Cinema

‘8’ (0x38) – Neo:6 Music

‘9’ (0x39) – Request decode mode

Response:

Byte:	Description:
RC	‘4’ (0x34) (Reply Code)
AC	Answer code
P1	‘1’ (0x31) – Zone 1
P2	Response:
	The current decode mode is returned,
	as for the command.

AVR350

E-43