GENERAL LUBRICATION

(Figures 23 and 24)

IMPORTANT: Wipe each fitting clean before and after lubrication.

IMPORTANT: DO NOT allow grease or oil to get on friction disc, friction plate or belts.

NOTICE: Apply Ariens Hi-Temp Grease or equivalent to the lubrication fittings. See SERVICE PARTS on page 38.

Sno-Thro should be lubricated at beginning of season or every 25 operating hours.

Auger Shaft

NOTICE: To grease auger shaft, remove shear bolt nuts and shear bolts. Apply grease at the grease zerks and then turn the auger assemblies on the auger shaft. Replace shear bolts per instructions in Shear Bolts on page 28.

920013, 014, 021

Grease

Oil

2x

Figure 23

EN - 26