1.Wing Knob
2.Discharge Chute Deflector
3.Discharge Chute
Figure 27 | OS8215 |
|
REMOTE DISCHARGE
DEFLECTOR CONTROL
ADJUSTMENT
(920014, 020, 021)
(Figures 28 and 29)
Deflector must stay in selected position while throwing snow.
If deflector does not stay in set position:
1.Tighten nut beneath control panel to increase pressure on deflector control
.
Adjustment Nut
Figure 28
If deflector does not follow full range of travel:
1.Push deflector remote all the way to rear most position.
2.Loosen adjusting nuts on remote deflector cable attached to the chute deflector (Figure 29).
3.To adjust the deflector lower:
Loosen bottom adjustment nut and tighten top adjustment nut.
To adjust deflector higher:
Loosen top adjustment nut and tighten bottom adjustment nut.
4.Check the deflectors range of travel and
repeat adjustment as necessary.
2
1
1. Adjusting Nuts
2.Cable Support Bracket
3.Remote Deflector Control Cable
Figure 29
EN - 29