11.Remove old friction disc. Put the new friction disc in place, cup side to carrier bearing.

12.Reinstall three screws into new friction disc and carrier bearing. Torque to

5 – 6 lbf-ft. (6.8 – 8.1 N•m).

920013, 014, 021

920020

4

9

 

 

7

3

8

6

 

2

 

 

1

 

5

10

1.

Hex Shaft

2.

Friction Disc Assembly

3.

Left Bearing Flange

4.

Speed Selector Arm

5.

Friction Disc

6.

Right Bearing Flange

1.Hex Shaft

2.Friction Disc Assembly

3.Left Bearing Flange

4.Speed Selector Arm

5.Friction Disc

6.Right Bearing Flange

7.Carrier Bearing

8.Spring Clip Pin

9.Pinion Gear

10.Drive Plate Assembly Figure 43

7.

Carrier Bearing

8.

Spring Clip Pin

9.

Pinion Gear

10.Drive Plate Assembly Figure 44

13.Insert new friction disc assembly into frame. Install washers onto carrier bearing and slide into speed selector arm.

14.Slide hex shaft through new friction disc assembly. Install pinion gear and washer onto hex shaft and slide shaft into right bearing.

15.Install left bearing using hardware removed in step 7.

16.Reinstall spring clip pin into hex shaft.

17.Connect adjustment pivot pin to speed selector arm. See Speed Selector Adjustment on page 30.

18.Install bottom cover.

19.Reinstall wheels.

20.Return unit to upright position.

21.Connect spark plug wire to spark plug.

22.Adjust traction drive clutch. See Traction Drive Clutch Adjustment on page 33.

EN - 36