![Ridge Caps & Panels](/images/new-backgrounds/91634/9163455x1.webp)
| Step 15 | ● Parts Needed For ● | ● 8840 Ridge Cap (1) |
|
| ● 7483 Roof Panel (2) |
| ||
| Ridge Caps & Panels |
| ||
| ● 8486 Ridge Cap (1) |
| ||
| A28 |
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Install the first ridge cap on the completed roof section using bolts and nuts. Fasten roof panel overlaps not used for ridge cap. Cover the head of bolt with the 2" (5 cm) piece of weather stripping tape. Do not fasten the ends of the ridge cap at this time.
2 Install the second ridge cap over- lapping the first ridge cap while in- stalling the remaining narrow roof panels. Continue weather stripping the ridge.
3 Fasten the lower end of the panels
to the side wall angles using screws and washers. Use bolts and nuts through wall angle overlaps at the bottom of the panel.
Cut Weather
Stripping and
Fold Under
7483
28
STEP
1
8486
8840
Strips
STEP
2
7483
STEP
3