| Step 6 | ● Parts Needed For ● | ● 8995 Wall Panel (2) |
|
| Corners | ● 9372 Front Wall Panel (2) |
| |
| ● 9362 Corner Panel (4) |
| ||
| A19 |
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
The remainder of the building assembly requires many hours and more than one person. Do not continue beyond this point if you do not have enough time to com- plete the assembly today. A partially assembled building can be severely damaged by light winds.
Each screw and bolt in the wall re- quires a washer.
9362
Wide Side
Narrow
Side
REAR
9362
1 Position a corner panel at the corner of the floor frame as shown. The widest part of each corner panel must be placed along the side of the
SIDE | TOP VIEW | SIDE |
STEP
building for all four corners. Fasten the corner panel to the floor frame with one screw.
Support the corner panel with a step ladder until a wall panel is attached.
2 Attach the front wall panels to the
front corner panels, as shown. A small gap will exist between front wall panel and ramp.
3 Attach the wall panels to the rear
corner panels, as shown.
1
93629362
FRONT
89958995
STEP
3
STEP
2
NOTE
Be careful to install the correct panel in each position as shown
4
the wall panels, before proceeding.
The floor frame must be square and level or holes will not align.
|
|
| 9372 |
| 9372 |
|
|
|
|
|
|
|
|
|
| 8995 | Crimped Rib |
| STEP |
|
| ||
|
| 9362 | Underneath | ||
| 4 |
|
| ||
|
| 8995 |
| 9362 | |
|
| 9362 | 9372 |
|
|
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
| Washer |
|
|
| 9372 | 9362 |
|
Panels rest on frame as shown
19
