| Step 7 | ● Parts Needed For ● | ● Door Track Assembly (1) |
|
| ● Rear Wall Angle Assembly (1) |
| ||
| Frames | ● Side Wall Angle Assemblies (2) |
| |
| ● Rear Wall Channel Assembly (1) |
| ||
| A20 |
| ● Side Wall Channel Assemblies (2) |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
The main frame pieces give rigidity to the side walls and provide a surface for attaching the gables which sup- port the roof.
1 Fasten the rear wall angle as-
sembly across the inside top of the rear wall using screws.
2 Fasten the rear wall channel as-
sembly across the middle of the rear wall using screws.
3 Fasten the side wall angles across
5986
Wall Angles
Must Face
Inside
9917
Building
STEP STEP
1 | 2 | FRONT | ||
| ||||
|
|
|
|
|
|
|
|
|
|
|
| 8839 |
|
the inside top of the side panels us- ing screws. Side wall angles must overlap rear wall angle in corners.
4 Fasten the side wall channel
assemblies across the middle of the side panels using screws. Fasten overlaps in rear corners with screws.
STEP
3
STEP
4
9922
FRONT
5 Fasten the door track assembly
(holes on top) across the top of the front wall panels using screws. See the figure.
NOTE
The wall channels behind the front wall panels will be installed in a later step.
Long Leg
on Top
9366
Opening
Facing in
Door Track Assembly
Short Leg on Bottom
STEP
5
FRONT
20