Step 18 | ● Parts Needed For ● |
Door Installation & Adjustment | |
A31 |
|
●Right Door Assembly (1)
●Left Door Assembly (1)
1 From inside the building, put the bottom of the right door assembly (on your left when you are inside the building) behind door jamb into the front frame track.
2 Position the top of the door so that the holes in the door line up with the holes in the door slides.
3 Fasten the door to the door slides
using two #10Bx1/2" screws per door slide.
NOTE
The holes in the door slides allow you to adjust the doors. Place the door in the middle holes.
Gable Horizontal Door Brace
Door Track
Door Slide
Door
STEP STEP
1 2
Front Floor Frame Assembly
Door Slide
4 Repeat steps 1 through 3 for the
left door.
Adjustment Holes
#10Bx1/2" Screw
STEP
3
Adjustment Holes Allow
Doors to Meet Evenly
Along Their Length
Right Door | Left Door |
STEP
4
Keep this Owner's Manual and Assembly Instructions for future reference. 31
