Step 13
A26
Installing the roof panels is best done with a step ladder. Begin installing roof panels at the back right corner of the building. Each screw and bolt in the roof requires a washer.
NOTE
Measure the building diagonally again and make adjustments to make sure the building is square. This will make the roof panels fit better, and holes will align.
NOTE
If a Roof Beef-Up Kit was
purchased, assemble prior to
attaching the roof panels.
1 Locate the roof panels by their
numbers. Note the sequence and position they are to be installed.
2 Position the right roof panel at the
back right corner and fasten to the gable with 5 bolts and nuts and roof beams using 2 screws. Do not fasten the lower end of the panel to the side wall angle at this time.
Hint: Attach fasteners in order shown in diagram.
● Parts Needed For ●
Right Roof Panel | ● 8468 Right Roof Panel (1) | |||
|
|
| ||
|
|
|
|
|
|
| STEP |
|
|
|
|
|
|
|
|
| 1 |
|
|
8469 |
|
|
| 8468 |
2 | 1 | |||
7483 | 6 | 5 | 7483 |
6529 | 8 | 7 | 6529 |
7483 | 10 | 9 | 7483 |
8468 | 4 | 3 | 8469 |
FRONT
STEP
2
6 8468 Right Roof Panel
1 | 7 |
|
|
| |
| 2 | 3 |
|
| |
|
| 4 |
5
Nut
Washer
Gable | Bolt |
|
26