Arrow Plastic SA108-A, NW108-A, PD108-A, EN108-A, NP108 Roof Beam Assemblies, Step, Parts Needed For

Step 3	● Parts Needed For ●
	Roof Beam Assemblies
D16

●10470 Roof Beam (8)

The roof beams join the two gables and support the roof panels. The main roof beam is made up of four pieces overlapped back to back at the cen- ter. The left and right roof beam as- semblies are made up of two pieces. Hint: These pieces are force-fitted, so you may have to press hard to join them together.

1 Place the end of one roof beam

inside a second roof beam so that the six holes in each piece align. Make four sets of roof beams by repeating this procedure. Do not insert bolts yet.

2 Take two of the pressed-together

10470

10470

STEP

1

Roof Beam 91 7/8" 2,3m

roof beams and join them as shown to form the main roof beam assembly. Hold the assembly together and fas- ten with 14 bolts. Build only one Doubled Beam Assembly.

3 Fasten the other two pressed-

together roof beams with eight bolts to make the left and right roof beam assemblies.

4 Set these pieces aside for later assembly.

STEP

2

10470

STEP

3

ASSEMBLED

END

VIEW

Build one Doubled Main Roof

Beam Assembly for Peak in Roof

10470

10470

10470

91 7/8"

2,3m

Build two Single Beam Assemblies

91 7/8"

2,3m

16