| Step 2 | ● Parts Needed For ● | ● 5986 Rear Wall Angle (2) |
|
| ● 9917 Rear Wall Channel (2) |
| ||
| Frame Assemblies | ● 9922 Side Wall Channel (4) |
| |
| ● 8839 Side Wall Angle (4) |
| ||
| A15 |
|
| |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
The main frame pieces reinforce the walls. These pieces will later be in- stalled in the center and at the top edge of the side walls and the rear wall. Proceed as follows:
1 Overlap the rear wall channel
pieces as shown in the figure and fasten the two pieces together with one bolt in the center hole (three holes will align).
2 Make two side wall channels by
overlapping the side wall channel pieces as shown. Fasten each set together with one bolt in the center
9917
9922
STEP
1
Rear Wall Channel 118 1/8" 3,0m 9917
Side Wall Channels
89 7/8" 2,3m
9922
STEP
2
hole of each set.
3 Overlap the rear wall angle
pieces as shown in the figure and fasten them together with one bolt in the center hole.
4 Make two side wall angles by
overlapping the side wall angle piec- es as shown. Fasten each set togeth- er with one bolt in the center hole.
5 Set the assemblies aside. You will use them later.
| Rear Wall Angle | |
5986 | 118 1/8" | 3,0m |
| 5986 |
|
Side Wall Angles
89 7/8" 2,3m
8839
8839
| STEP |
| STEP |
|
| 3 |
| 4 |
|
|
|
|
|
|
|
|
|
|
|
Rear Wall Channel
118 1/8" 3,0m
Side Wall Channels
89 7/8" 2,3m
Rear Wall Angle 118 1/8" 3,0m
STEP | Side Wall Angles | |
5 | 89 7/8" | 2,3m |
|
| |
|
|
|
15