Asante Technologies Wireless USB Adapter Select Specify an IP address, Administration.…

To configure network access for Windows 98SE and Windows Me on the server side:

Note: Internet Protocol (IP) routing software is required on Windows 98SE and Windows Me servers; a trial version of WinRoute Lite may be downloaded from the Tiny Software (http://www.tinysoftware.com). Asanté is not able to provide support for IP routing software. Please contact your software vendor (e.g., Tiny Software) for assistance.

1.From the Windows Control Panel, double-click the Network icon.

2.On the Configuration tab, select TCP/IP-> Bluetooth LAN Access Server Driver (scroll down if necessary).

3.Click Properties and select the IP Address tab.

4.Select Specify an IP address.

5.Enter an IP Address (suggested value: 192.168.123.1) and a Subnet Mask

(suggested value: 255.255.255.0).

6.Click OK buttons twice to close the dialog boxes.

7.Click YES to restart your computer.

If you are using WinRoute, you will need to configure the software:

8.In the Windows system tray, right-click the WinRoute icon and select

Administration.…

9.On the Settings tab, select 2nd network adapter.

10.From the Network adapter drop-down list choose any adapter other than the Asanté FriendlyNET adapter and click the Settings button.

11.On the DHCP tab, in the Adapter drop-down list, select the Asanté FriendlyNET FBT100 adapter (or equivalent).

12.Select Enable DHCP Server.

13.Fill in the client IP address range fields using these suggestions:

•From: 210

•To: 240

14.Click OK and then minimize (do not close) the WinRoute Administration configuration panel.

Asanté FBT100 User’s Guide 11/12/02 Edition 34