Selecting Settings
Signal
The Signal controls the volume of the beep that is made when you press any of the buttons at the end of the cycle.
Press Signal to adjust the sound level or turn off the signal.
Dry Sensor
•Use these buttons to set dry level.
•First, select the Sensor Dry program.
•Select dry level to adjust how much you want to dry the load. As the program runs, the control senses the dryness of the load and adjusts the time automatically based on the selected dryness level.
Note!
Dry Sensor selections can only be made while using the Sensor Dry programs. Selecting “more dry” or “less dry” automatically adjusts the preset times for the manual dry programs.
Temp.
Use the Temp. option to select temperatures for the Manual Dry programs. Press Temp. until the desired temperature setting glows. You can't change temperatures on sensor dry programs. Temperature is set by the program.
Dry Time
Use Dry Time option to change drying time per your preference. When choosing Dry Time, the temp is always set to "High" by default however temperature can be changed per your desire setting.
You can select the desired operation time manually by pressing the Dry Time button between 20 to 60 minutes.
14
Customer Care Center
www.askousa.com
