Selecting Options
Note!Important!
Time change is available only with Manual dry, Dry Time and Rack dry programs.
Remember to press the Start/Stop button to start the program.
Damp Signal
When you select the Damp Signal option, a beep will alert you when your load is just damp enough for ironing or pressing. This notice will allow you to remove lightweight items that are dried or other items that you may wish to iron.
Anti-crease
This option helps to prevent wrinkles on your laundry. When you select the
Delay Start
When you select Delay Start, the machine will start between 1 and 12 hours after you press the Start/Stop button.
•Press the Delay Start button the same number of times as the number of hours by which you want to delay the start (1~12 hours).
•The number of hours of delay start you have selected will be shown in the display.
•Press the Start/Stop button.
•The number of hours to start is displayed with a countdown one hour at a time.
•Cancel Delay Start by pressing power button and turning the machine off.
•Turn the power back on, select a program and press the Start/Stop button.
16
Child Lock *
The child lock option can be used to prevent a child from pausing or cancelling a dry program once it has been started. To set this option, you must first select a dry program and any desired options. Press the Start/Stop button to start the cycle. Next, press the Child lock button for 3 seconds to engage the Child lock option. Child lock will be lit up as long as the option is active. To cancel this mode, hold the Child lock button again for 3 seconds, and turn off the main power button. You will have to set the Child Lock option at the beginning of every cycle you choose to have protected.
Estimated Time Remaining
The display shows the estimated time remaining. In addition to this, if the dryer has some problem, it displays error messages. Refer to Trouble shooting guide.
Customer Care Center
www.askousa.com
