IV. Hardware Setup

This section gives descriptions of how to install and remove components. When setting up devices on the server, perform the following steps.

4-1. Opening the Chassis

Panel Screws

The top panel on the chassis is secured by two screws on the back of the server. To open the top panel, remove the screws with a screw driver.

NOTE: You do not have to open the top panel before

removing the left panel.

The side panels are secured by two large thumb screws on the front of the server, which can be turned with your fingers.

Removing the

Right Panel

To remove the right panel, the front door must be removed by pushing down on the hinge spring.

Opening the Chassis

IV. Hardware Setup

AP 3000 Hardware Reference Guide

17