IV. Hardware Setup

1

2

3

4

5

Hot-Swap Tray

There are two levers on the front of the hot-swap tray to help release or lock the tray. To remove the tray, extend both levers and pull on both levers. To install the tray, push the tray firmly into the bay with the levers extended, then close the levers.

Hardware Setup

Hot-Swap Bay

IV.

 

 

 

Hot-Swap Bay

To remove the hot-swap bay, release the front cooling fans first by pressing the eject mechanism with a small screwdriver. Remove the six retaining screws as circled above and then the entire hot-swap bay can be slid out of the chassis.

AP 3000 Hardware Reference Guide

29