Asus AP3000 • 4-13.Expansion Card Guide, SCSI ID Dip Switches (Cont’), Securing, Expansion Card, Guide

Setup Hardware .IV

Stabilizer Card Expansion

IV. Hardware Setup

SCSI ID Dip Switches (Cont’)

IDSEL1 IDSEL0 Slot1 Slot3B Slot5B

ON

IDSEL 1=off

	IDSEL 0=off	off	off	Resv.
ON	IDSEL 1=on
		on	on	15	11	3
	IDSEL 0=on
ON	IDSEL 1=on
	IDSEL 1=off	on	off	14	6	1
ON	IDSEL 1=off
		off	on	13	5	0
	IDSEL 0=on

NOTE

All SCSI devices must have a SCSI identification number that is not in use by any other SCSI device. SCSI devices vary in how they set the ID number. Refer to the product manual for any additional devices that you may install for details on how to set its ID number.

• 4-13. Expansion Card Guide

The chassis provides an adjustable expansion card guide to help hold expansion cards in their slots.

		Securing
		Expansion Card
		Guide
		The expansion card guide is
		mounted by four screws on the
		top and bottom edge of the chas-
		sis. There are 18 knobs on the
		stabilizer. Turn the knob over the
		appropriate expansion card
		counterclockwise to extend the
		metal arm under each knob.
Knob	Metal Arm
		Keep turning until the arm is
		firmly pressed against the expan-
		sion card. Turn the knob clock-
		wise to retract the metal arm.

34 AP 3000 Hardware Reference Guide