I.Introduction

•1-3. Features

AP3000 is a department server configured on the XG-DLS smart motherboard which uses the 440GX chipset from Intel and supports two Pentium II processors and 100MHz front side bus in order to handle even the most complicated server tasks.The following are highlights to this server’s many features. For additional features and de- tails, read the motherboard User’s Manual included with this server package.

•Processor: Supports dual Intel® Pentium® II Xeon™ processors from 450MHz to 550MHz on each processor for extreme server processing speeds.

•Memory: Equipped with four DIMM sockets to support up to 2GB SDRAM with ECC.

•AGP Slot: Supports Accelerated Graphics Port cards for high perfor- mance, component level interconnect targeted at 3D graphical display applications. Using AGP will also free up a PCI slot.

•Adaptec SCSI Chipset: Features Adaptec AIC-7896 dual-channel Ul- tra2 SCSI chipset that supports any combination of 50-pin narrow or 68-pin wide/ultra2 devices through the onboard 50-pin and 68-pin SCSI connectors.

•Device Bays: Support one floppy, one CD-ROM, two additional fixed devices, and five hot-swap SCA hard disk drives.

•SCSI Backplane: Ultra2 SCSI SCA backplane with remote SCSI ID dip switches and power to support up to 5 Ultra2 SCSI SCA hard drives.

•Onboard IDE: Up to 33MB/sec IDE transfer with UltraDMA/33.

•Onboard Hardware Monitor: Provides information for system and processor voltages, fan status, temperature, chassis intrusion, and pro- vides automatic system restart.

•Onboard LAN: Onboard Intel 10/100Base-TX Fast Ethernet.•ASMA and Intel LDSM: Provides server monitoring, management, and control.

•RAID Controller: Supports PCI-DA2100A(UW) RAID controller, PCI- DA2200(U2) or DA-3000(U2) SCSI to SCSI RAID controller, which provides good fault tolerance.

Introduction

Features

I.

 

 

 

AP 3000 Hardware Reference Guide

9