Asus AP3000 • 4-12.SCSI ID Setting, SCSI ID Dip Switches

IV. Hardware Setup

• 4-12. SCSI ID Setting

SCSI ID settings are made through DIP switches located on the SCSI board. The SCSI board has four dip switches to set the hard drive’s power-ON delay and SCSI ID.

SCSI ID Setting

	IDSEL1	IDSEL0		Slot1		Slot2	Slot3A/3B	Slot4	Slot5A/5B
	off	off		Reserved
	on	on		15		12	11	8	3
	on	off		14		9	6	4	1
(*)
	off	on		13		10	5	2	0
	(*) Default
Hard Disk Drive Power On Delay
	RMT_START		DLY_START		Description
	off		off		Motor (spin) up when powering on
	on		off		Motor (spin) up after START UNIT command
(*)	off		on		Motor (spin) up after 12xSCSI ID ms
	on		on		Reserved

(*) Default

SCSI ID Dip Switches

				DLY_START
				RMT_START
				IDSEL 1
				IDSEL 0		Default setting
									DLY_START	on
					ON
ON									RMT_START	off
									IDSEL 1	off
									IDSEL 0	on
				1		2	3	4
1	2	3	4

		IDSEL1 IDSEL0		Slot1	Slot2	Slot3A	Slot4	Slot5A
ON	IDSEL 1=off
	IDSEL 0=off	off	off	Resv.
ON	IDSEL 1=on
		on	on	15	12	11	8	3
	IDSEL 0=on
ON	IDSEL 1=on
	IDSEL 1=off	on	off	14	9	6	4	1
ON	IDSEL 1=off
		off	on	13	10	5	2	0
	IDSEL 0=on

Hardware Setup	SCSI ID Setting
IV.

AP 3000 Hardware Reference Guide 33