4.Press the lower spring hooks inward, then insert to the lower CPU heatsink holes until they snap in place.
5.Repeat the process to install the second spring to the CPU2 heatsink holes.
The support plates appear as shown when installed.
6.Install the motherboard with the external I/O ports toward the chassis rear panel. The CPU sockets should be right on top of the CEK springs.
Heatsink hole matched to the hole on the CEK spring
7.Secure the motherboard with 9 screws. Refer to section “2.2.2 Screw holes” for illustration.
2 - 8 | Chapter 2: Hardware information |