4 . Keyboard power (3-pin KBPWR1)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS.

KBPWR1

1

2

2

3

 

 

 

 

 

+5V +5VSB (Default)

NCCH-DR

NCCH-DR Keyboard power setting

5.SATA controller setting (3-pin SATA_EN1) On SATA models only

These jumpers allow you to enable or disable the onboard Adaptec® AIC-8130 SATA RAID controller. Set to pins 1-2 to activate the SATA controller.

NCCH-DR

SATA_EN1

 

3

2

2

1

 

Enable

Disable

(Default)

 

NCCH-DR SATA_EN setting

ASUS NCCH-DR

2 - 23