Super I/O Device | Select Menu | ||
Serial Port1 Address | [3F8/IRQ4] | Item Specific Help | |
Serial Port2 Address | [2F8/IRQ3] | ||
| |||
Onboard Parallel Port | [378/IRQ7] | Set Base I/O address | |
Parallel Port Mode | [SPP] | ||
for serial port 1. | |||
EPP Mode Select | EPP1.7 | ||
| |||
ECP Mode Use DMA | 3 |
|
Allow you to select the serial port base addresses.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
Onboard Parallel Port [378/IRQ7]Allows you to select the parellel port base address.
Configuration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7]
Parallel Port Mode [SPP]Allows you to select the parallel port mode.
Configuration options: [SPP] [EPP] [ECP] [ECP+EPP] [Normal]
EPP Mode Select [EPP1.7]Allows you to select the EPP mode. This item becomes configurable only if the Parallel Port Mode is set to [EPP] or [ECP+EPP].
Configuration options: [EPP 1.9] [EPP 1.7]
ECP Mode Use DMA [3]Allows you to select the ECP mode. This item becomes configurable only if the Parallel Port Mode is set to [ECP] or [ECP+EPP].
Configuration options: [1] [3]
4 - 26 | Chapter 4: BIOS setup |