Hot Key Power On [Ctrl-F1]

Allows you to set a hot key combination to turn the system power on. Configuration options: [Ctrl-F1] ... [Ctrl-F12]

To configure this item, you should set the Power On Function item to [Hot Key].

Resume by Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake event. When this item is enabled, you can set the date and time of alarm using the two following items. Configuration options: [Disabled] [Enabled]

Date (of Month) Alarm [0]

To set the date of alarm, highlight this item and press <Enter> to display a pop-up menu. Key-in a value within the specified range then press <Enter>. Configuration options: [Min=0] [Max=31]

Time (hh:mm:ss) Alarm [0 : 0 : 0]

To set the time of alarm:

1.Highlight this item and press <Enter> to display a pop-up menu for the hour field.

2.Key-in a value (Min=0, Max=23), then press <Enter>.

3.Press tab to move to the minutes field, then press <Enter>.

4.Key-in a minute value (Min=0, Max=59), then press <Enter>.

5.Press tab to move to the seconds field, then press <Enter>.

6.Key-in a value (Min=0, Max=59), then press <Enter>.

ASUS NCCH-DR

4 - 35