6 . SATA controller LED setting (3-pin 8130LED1)

This jumper allows you to enable or disable the SATA controller LED indicator in the chassis front panel.

HDLED

RECOVERY 8130 LED1

PANEL1

8130 LED1

1

2

 

2

3

 

 

 

 

 

Disable Enable (Default)

NCCH-DR

NCCH-DR 8130 LED setting

7 . Gigabit LAN controller setting (3-pin LAN_EN1; LAN_EN2)

These jumpers allow you to enable or disable the onboard Gigabit LAN controllers. The LAN_EN1 jumper is for the Intel® 82547GI Gigabit LAN controller (CSA) that controls the LAN1 port. The LAN_EN2 jumper is for the Intel® 82541GI Gigabit LAN controller (32-bit) that controls the LAN2 port. Place the jumper caps on pins 1-2 to activate the Gigabit LAN controller.

LAN_EN1

1

2

 

2

3

 

 

 

 

 

Enable Disable (Default)

NCCH-DR

NCCH-DR LAN_EN1 setting

LAN_EN2

1

2

 

2

3

 

 

 

 

 

Enable Disable (Default)

NCCH-DR

NCCH-DR LAN_EN2 setting

2 - 24

Chapter 2: Hardware information