ASUS Terminator P4 533 Barebone System
29
2.9 Re-connect cables
You may have disconnected some cables when you were installing
components. You must re-connect these cables before you replace the
chassis cover.

2.9.1 LED cables

•Connect the power switch and power LED cables to their respective
leads in the PANEL1 connector on the motherboard.
•Connect the HDD LED cable to the 2-pin lead marked IDE_LED1.
Power Switch
Power LED
HDD LED
PANEL1
IDE_LED1
*
Requires an ATX power supply.
PLED
Ground
MLED
PWR
+5VSB
+5V
Speaker
Speaker
Connector
Power LED
Ground
+5 V
Reset SW
SMI Lead
Message LED
ExtSMI#
Ground
Reset Ground
Ground
ATX Power
Switch*
PANEL1 Connector