2.10 Replace the cover
After you have installed all the internal components and you have connected all the necessary cables, you are now ready to put the system back together.
Follow these steps to
1.With the chassis lying on its side, hook the swivel edge of the drive frame to the main chassis.
2.Sway the drive frame inward until it fits completely. The protruding tabs on both ends of the drive frame should snap perfectly to the chassis edge.
3.Turn the chassis upright.
4.Place the cover over the chassis leaving about two inches from the rear panel.
Protruding Tab
ASUS Terminator P4 533 Barebone System | 31 |
