| Menu | Description |
|
| Configure | Allows you to create RAID 0 or RAID 1 set using the Easy | |
|
| Configuration or the New Configuration command. This menu also | |
|
| allows you to view, add, or clear RAID configurations or select the | |
|
| boot drive |
|
| Initialize | Allows you to initialize the virtual drive of a created RAID set |
|
| Objects | Allows you to initialize virtual drive or change the virtual drive | |
|
| parameters |
|
| Rebuild | Allows you to rebuild failed drives |
Check Consistency Allows you to check the data consistency of the virtual drive of a created RAID set
6.3.1Creating a RAID 0 or RAID 1 set
The LSI Software RAID Configuration Utility allows you to create a RAID 0 or RAID 1 set using two types of configurations: Easy and New.
In Easy Configuration, the virtual drive parameters are set automatically including the size and stripe size (RAID 1 only).
In New Configuration, you manually set the virtual drive parameters and assign the set size and stripe size (RAID 1 only).
Using Easy Configuration
To create a RAID set using the Easy Configuration option:
1.From the utility main menu, highlight Configure, then press <Enter>.
2.Use the arrow keys to select Easy Configuration, then press <Enter>.
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
|
|
|
|
|
|
|
| Configuration Menu |
|
|
| Easy Configuration |
| |
| Management | MenuNew Configuration | ||
| ||||
Configure | View/Add Configuration | |||
Initialize | Clear Configuration | |||
Objects | Select Boot Drive | |||
Rebuild |
|
|
| |
|
|
|
Check Consistency
Defines Physical Arrays. An Array Will Automatically Become A VD
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Chapter 6: RAID Configuration |