2.Attach the second inner rail to the other side of the chassis and secure with three inner rail screws.
3.Select one unit of space (1U) on the rack where you wish to install the server.
4.Place three (3) nuts on the front and three at the back. Do the same to the corresponding side of the rack.
Nuts
5.Adjust the length of the outer rail to fit the length of the rack cabinet, then fasten the two screws.
6.Secure the outer rail with two screws at the front and rear of the rack cabinet .
7.Find the corresponding 1U space on the other side of the rack cabinet then repeat steps 5 and 6 to attach the other outer rail.
Chapter 3: Installation options |