4.3.2Internal connectors

1.Floppy disk drive connector (34-1 pin FLOPPY1)

This connector is for the provided Floppy Disk Drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.

P5BV-M/RS100-E5

P5BV-M/RS100-E5

FLOPPY1

PIN1

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

Floppy Disk Drive Connector

Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5.

4-8

Chapter 4: Motherboard Information