10.System panel auxiliary connector (20-2 pin AUX_PANEL1) This connector supports several server system functions.

AUX_PANEL1

P5BV-M/RS100-E5

P5BV-M/RS100-E5 Auxiliary Panel Connector

 

1

2

2

NC I2CCLK1

GND I2CDATA1 +5VSB LAN1 LINKACTLED- LAN1 LINKACTLED+

LAN2 LINKACTLED+ LAN2 LINKACTLED-

+5VSB

CASEOPEN GND LOCATORLED1+ LOCATORLED1-

LOCATORBTN#

GND

LOCATORLED2- LOCATORLED2+

3 4 5 4

•Front panel SMB (6-1 pin FPSMB)

These leads connect the front panel SMBus cable.

•LAN activity LED (2-pin LAN1_LED, LAN2_LED)

These leads are for Gigabit LAN activity LEDs on the front panel.

•Chassis Intrusion connector (3-pin CASEOPEN)

This lead is for a chassis with an intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

•Locator LED (2-pin LOCATORLED1 and 2-pin LOCATORLED2)

These leads are for the locator LED1 and LED2 on the front panel. Connect the Locator LED cables to these 2-pin connector. The LEDs will light up when the Locator button is pressed.

•Locator Button/Switch (2-pin LOCATORBTN)

This connector is for the locator button. This button queries the state of the system locator.

ASUS RS100-E5-PI2

4-15