2.RAID controller selection (3-pin RAID_SEL1)

This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Matrix Storage Manager.

P5BV-M/RS100-E5

 

 

 

 

RAID_SEL1

 

1

2

2

3

LSI RAID ROM

INTEL RAID ROM

(Default)

 

 

P5BV-M/RS100-E5 RAID_SEL1 Setting

 

 

3.Force BIOS recovery setting (3-pin RECOVERY1)

This jumper allows you to quickly update or recover the BIOS when it gets corrupted.

To update the BIOS:

1.Prepare a floppy disk that contains the latest BIOS for the motherboard (xxxx-xxx.ROM) and the AFUDOS.EXE utility.

2.Set the jumper to pins 2-3.

3.Insert the floppy disk then turn on the system to update the BIOS.

4.Shut down the system.

5.Set the jumper back to pins 1-2.

6.Turn on the system.

P5BV-M/RS100-E5

RECOVERY1

 

 

 

1

2

2

3

Normal

BIOS recovery

(Default)

 

 

P5BV-M/RS100-E5 BIOS Recovery Setting

ASUS RS100-E5-PI2

4-5