4.Insert the Serial ATA drive into the drive plate as shown.

5.Secure the hard drive with four screws.

6.Connect the Serial ATA signal cable and ATX power connectors. Use the L-type Serial ATA connector to connect to the hard drive.

SATA L-type connector

7.Connect the other end of the Serial ATA signal connector to the onboard SATA connector labeled SATA3.

ATX power connector

SATA signal cable

P5BV-M/RS100-E5

SATA3

 

GND RSATA RXN1 RSATA RXP1 GND RSATA TXN1 RSATA TXP1 GND

P5BV-M/RS100-E5 SATA3 Connector

2-16

Chapter 2: Hardware setup