5.Connect the other end of the
Serial ATA signal connector to the onboard SATA connector labeled SATA1. Refer to illustration below for the location of SATA1 connector.
SATA1 | |
| GND RSATA RXN1 RSATA RXP1 GND RSATA TXN1 RSATA TXP1 GND |
To install secondary Serial ATA drive:
1.If you have an ODD installed, remove the ODD bay first before you install a secondary SATA disk drive.
To remove, disconnect the ODD cable and power cable then use a screwdriver to remove all two screws.
2.Locate the Serial ATA drive plate under the optical disk drive (ODD) bay.
SATA drive plate
3.Secure the hard disk drive brackets to the HDD with four screws.
HDD bracket
ASUS |