5. OS Driver Installation
For DOS System Users:
Under this section, DOS system users have two choices.
1.Use a utility that will copy the raw dd image onto a 1.44 Mbytes floppy diskette. For UnixWare 2.1.X, this dd image is located at:
\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW21X\UNIXWARE.DD
For UnixWare 7, this dd image is located at:
\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW7 \UNIXWARE.DD
RAWRITE3.COM, which is a public domain utility, is available on this CD- ROM at this location:
\Drivers\Sdms\Drivers\UNIXES \RAWRITE3.COM
Instructions for using this utility are included in its accompanying RaWrite file or as a Microsoft Word document located at:
\Drivers\Sdms\Drivers\UNIXES \RAWRITE3.DOC
2.The other DOS alternative is to use the
\Drivers\Sdms\Diskimag\Uw7.exe or (Uw21x.exe)
B. New System Installation
1.Boot the computer using the installation diskettes or Bootable OS CD Disc that you received with the UnixWare operating system distribution package. For example, UnixWare 7 has two diskettes.
2.Follow the instructions on the screen.
3.Insert the “PCI SCSI SCO UnixWare driver” diskette when prompted to insert the host adapter diskette. To install other host adapter drivers, insert the host adapter diskette provided with the UnixWare distribution package and press Enter. If there are no other host adapter drivers to install, continue the installation and follow the instructions.
4.The system loads the required drivers, such as C8XX, and indicates when they are loaded.
5.At the end of the installation, you will see a prompt to reinsert the HBA driver diskette. Insert the “PCI SCSI SCO UnixWare driver” diskette and press Enter. The kernel will be built and the installation will terminate.
6.Remove the driver diskette when prompted to do so and reboot the system.
5. Driver Installation SCO UnixWare Server
ASUS | 101 |