Connectors

SETUP H/W .3

3.HARDWARE SETUP

2)IDE/SCSI Activity LED (2-pin HDLED)

This connector supplies power to the chassis activity LED. Read and write activity by devices connected to the primary/secondary IDE and SCSI connectors cause the LED to light up.

TR-DLS

TIP: If the case-mounted LED does not light, try reversing the 2-pin plug.

HD_LED

-

+

TR-DLS HD Activity LED

3)Floppy Disk Drive Connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged).

TR-DLS

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

PIN 1

TR-DLS Floppy Disk Drive Connector

32

ASUS TR-DLS User’s Manual