4.BIOS SETUP

4.5.1Power Up Control

SETUP BIOS .4

Menu Power

AC PWR Loss Restart [Disabled]

This allows you to set whether you want your system to reboot after the power has been interrupted. [Disabled] leaves your system off. [Previous State] reverts your system to the same state before the power interruption. Configuration options: [Disabled] [Previous State]

Onboard LAN Power Up [Disabled]

Power Up on PCI Card [Disabled]

These fields allow you to boot your computer from another computer by sending a wake-up frame or signal to the LAN device, or the PCI modem card if present.

IMPORTANT: This feature requires an optional network interface card with Wake- On-LAN feature and an ATX power supply with at least 720mA +5V standby power.

Power On By PS/2 Keyboard [Disabled]

This parameter allows you to use specific keys on a PS/2 keyboard to turn on the system. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]

IMPORTANT: This feature requires an optional network interface card with Wake- On-LAN feature and an ATX power supply that can supply at least 350mA on the +5VSB lead.

You must set the KBPWR jumper to pins 2-3 (5VSB) before you enable this function (refer to page 22 for the jumper location).

62

ASUS TR-DLS User’s Manual