3.HARDWARE SETUP
•Reset Switch Lead (2-pin)
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without having to turn off your power switch. This is a preferred method of rebooting to prolong the life of the system power supply.
•System Power LED Lead (3-1 pin)
This 3-1 pin connector connects to the system power LED that lights up when the system is powered on and blinks when it is in sleep or soft-off mode. This feature can be programmed through the ASUS ASIC.
•NMI Lead (2-pin)
This 2-pin connector connects to a panel button to allow a non-mask interrupt command to be sent to the operating system.
•System Warning Speaker Lead (4-pin)
This 4-pin connector connects to the case-mounted speaker.
•HDD Activity LED (2-pin)
This connector supplies power to the IDE and SCSI activity LED. Read and write activity by devices connected to the IDE and SCSI connectors cause this LED to light up.
