Connectors

SETUP H/W .3

3.HARDWARE SETUP

13)IPMI Connector (4-pin )

This connector allows you to connect devices that support Intelligent Platform Manangement Interface (IPMI) Rev1.0 or Rev1.5.

TR-DLS

NC

IPMICLK

GND

IPMIDATA

TR-DLS IPMI Connector

14)System Panel Connector (20-pin )

This connector is for different front panel functions.

PowerLED +

NICactivity LED–

PowerLED –

Keylock GND NMIbutton

+5V HDDaccess LED+

HDDaccess LED–

Speaker

 

 

 

TR-DLS

 

 

 

 

 

 

 

Pin

Connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 & 12

NIC Activity LED

11

 

 

 

 

 

 

20

2 & 3

Status LED

 

 

 

 

 

 

6 & 7

Power Switch

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

10

9 & 10

Reset Switch

LED+Status

 

SwitchPower

GND

buttonRESET

GND

11 & 13

Power LED

LED+activityNIC

LEDStatus–

 

 

14

Keylock

 

 

 

 

 

 

 

 

15* & 16

NMI Button

 

 

 

 

 

 

 

 

17 & 20

Speaker

 

 

 

 

 

 

 

 

18 & 19

HDD Access LED

 

 

 

 

 

 

 

 

* Shared

 

TR-DLS System Panel Connectors

•NIC Activity LED Lead (2-pin)

This shows the status of the NIC through a panel-mounted LED.

•Status LED (2-pin)

This shows the system status as programmed through the ASUS ASIC.

•ATX Power Switch / Soft-Off Switch Lead (2-pin)

The system power is controlled by a momentary switch connected to this lead. Pushing the button once switches the system between ON and SLEEP or ON and SOFT OFF, depending on your BIOS or OS setting. Pushing the switch while in the ON mode for more than 4 seconds turns the system off. The system power LED shows the status of the system power.

38

ASUS TR-DLS User’s Manual