5.OS Driver Installation
b.“Do you want the kernel environment rebuilt (y/n)?”
Type: y
Press Enter.
9.To activate the new kernel, you must reboot the system. At the command prompt, type:
#reboot (or init 6)
II.Intel 82550 Network Driver Installation
SCO OpenServer 5.0.6 system can correctly recognize Intel 82550 network controller during installation. User doesn’t need to load or modify the network driver for the onboard LAN device.
User also can find the Intel 82550 Network driver from ASUS Driver Support CD at
\Drivers\Lan\UNIX\SCO5
Instructions for Installing the eeE Driver for SCO OpenServer
1.Copy the eee.vol file to any directory, say /tmp, on the SCO system, renaming the file as VOL.000.000. Also, make the file
For example,
#cp eeE.vol /tmp/VOL.000.000
#chmod 444 /tmp/VOL.000.000
2.If there is an older version of the eeE driver on the system, you must first remove it. To do this, run ‘netconfig’. Remove all instances of the “ Intel ...” adapters. Exit netconfig without opting to relink the kernel.
3.Install the new driver using ‘custom’. When asked for the installation media, choose ‘media images’, and type the directory path to the VOL.000.000 file. (In step 1, if you copied it to /tmp, type ‘/tmp’). After the installation of the driver is complete, exit ‘custom’.
4.Run ‘netconfig’ and add the adapters. For each adapter that is present in the system, enter the appropriate TCP/IP parameters. By default, the driver automatically detects the line speed and duplex mode. If you want to force any of these settings, choose ‘Advanced Options’ and set the speed and duplex modes. Exit ‘netconfig’ and choose to relink the kernel.
5.Reboot the system.At the command prompt, type:
#reboot (or init 6)
5. Driver Installation SCSO Open Server
ASUS | 99 |