Asus Dual Socket 370 Motherboard, TR-DLS manual 37

3.HARDWARE SETUP

11)ATX Power Connector (20/24-pin block ATXPWR)

This connector is for an ATX power supply with 20/24-pin power connector. The connector from the power supply is designed to fit this connector in only one orientation. Find the proper orientation and push down firmly until the plug completely fits in.

IMPORTANT: Make sure that your ATX power supply can supply at least 720mA on the +5-volt standby lead (+5VSB). The system may become unstable and may experience difficulty powering up if the power supply is inadequate.

It is recommended that you purchase a power supply with 24-pin power connector.

				1
	+3			Volts	+3 Volts
		+3		Volts	-12 Volts
			Ground		Ground
			+5 Volts		PSON#	For Power Supply
			Ground		Ground
TR-DLS
		+5		Volts	Ground	with 20-pin
						Power Connector
			Ground		Ground
			Power OK		-5 Volts
			+5V Standby		+5 Volts
		+12		Volts	+5 Volts
					+5 Volts
		+12		Volts
		+3		Volts	Ground

3. H/W SETUP

Connectors

TR-DLS ATX Power Connector

24-pin Power Connector

12)ASMC Connector (50-pin eRMC )

This connector allows you to connect the optional ASMC-LE or ASMC-ME card using an ASMC interface cable. Install the ASMC card into the PCI6 slot and connect the cable from the card to this connector. The PCI6 slot on the motherboard has a Low Pin Count (LPC) signal connector to accommodate the ASMC card.

TR-DLS

TR-DLS ASMC Connector

ASUS TR-DLS User’s Manual 37