3.HARDWARE SETUP

4)Wake-On-LAN Connector (3-pin WOL_CON)

This connector supports a LAN card with a Wake-On-LAN output. The connector powers up the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that the BIOS item Onboard LAN Power Up is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power.

 

 

 

 

 

 

 

 

IMPORTANT: Requires an ATX power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TR-DLS

 

 

 

 

 

 

 

 

 

supply with at least 720mA +5 volt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

standby power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WOL_CON

Ground

PME +5 Volt Standby

TR-DLS Wake-On-LAN Connector

5)Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port.

TR-DLS

WOR

Ring# Ground

2 1

TR-DLS Wake-On-Ring Connector

3. H/W SETUP

Connectors

ASUS TR-DLS User’s Manual

33