The NorthBridge Configuration menu allows you to change the Northbridge related settings.
|
|
| BIOS SETUP UTILITY |
|
|
| Advanced |
|
|
|
|
North Bridge Chipset Configuration | ENABLE: Allow | ||||
|
|
|
| ||
Memory Remap Feature | [Enabled] | remapping of | |||
DRAM Frequency | [Auto] | overlapped PCI memory | |||
Configure DRAM Timing by SPD | [Enabled] | above the total | |||
|
|
|
| physical memory. | |
Boot Graphics Adapter Priority[PEG/PCI] | DISABLE: Do not allow | ||||
|
|
|
| ||
PEG Port Configuration |
| remapping of memory. | |||
PEG Port | [Auto] |
|
| ||
|
|
|
|
| Select Screen |
|
|
|
|
| Select Item |
|
|
|
| +- | Change Option |
|
|
|
| F1 | General Help |
|
|
|
| F10 Save and Exit | |
|
|
|
| ESC Exit | |
v02.58 (C)Copyright
Allows you to remap the overlap PCI memory over the total physical memory. Configuration options: [Disabled] [Enabled]
DRAM Frequency [Auto]Allows you to set the DDR operating frequency.
Configuration options: [Auto] [533 MHz] [667 MHz]
Configure DRAM Timing by SPD [Enabled]When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM
DRAM CAS# Latency [5]
Controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [5] [4] [3]
DRAM RAS# to CAS# Delay [6 DRAM Clocks]
Controls the latency between the DDR SDRAM active command and the read/write command. Configuration options: [2 DRAM Clocks]
[3 DRAM Clocks] [4 DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks]
DRAM RAS# Precharge [6 DRAM Clocks]
Controls the idle clocks after issuing a precharge command to the DDR SDRAM. Configuration options: [2 DRAM Clocks] [3 DRAM Clocks] [4 DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks]
ASUS |