10.The screen displays the information on the created RAID set. Press <Esc> to exit the utility.

6.4.4Creating a RAID 1 set (Mirror)

To create a RAID 1 set for Fault Tolerance:

1.Follow steps 1 to 2 of the Creating a RAID 0 set section.

2.Select RAID-1 (Fault Tolerance) from the Select RAID Type menu, then press <Enter>.

Refer to the Mirroring Requirements note at the bottom of the screen to determine the number of hard disk drives required for the selected RAID type.

ASUS TS300-E3/PA4 & PS4

6-37