The barebone system comes with five LED indicators. Refer to the following table for the LED status description.
System and HDD LEDPower LED (blue)
HDD Access LED (green)
! Message LED (red)
Drive Status LED (green/red)
Drive Activity LED (green)
LED | Icon Display status | Description |
System |
|
|
Power LED | ON | System power ON |
| Blinking | System is in suspend mode |
HDD Access LED | OFF | No activity |
| Blinking | Read/write data into the HDD |
Message LED | OFF | System is normal; no incoming event |
| Blinking | ASMS indicates a HW monitor event |
Hard disk drives |
|
|
Drive Status LED | Green | Bridge board connected to backplane |
|
| Installed HDD is in good condition |
| Red | HDD failure |
| Green/Red - Blinking | HDD rebuilding using the RAID card |
|
| |
Drive Activity LED | Blinking | Read/write data into the HDD |
|
|
|
*SCSI Access
The Power, HDD Access, and Message LEDs are visible even if the system front bezel is closed.
ASUS |