Menu | Description |
Configure | Allows you to create RAID 0 or RAID 1 set using the Easy Configuration |
| or the New Configuration command. This menu also allows you to view, |
| add, or clear RAID configurations or select the boot drive |
Initialize | Allows you to initialize the logical drives of a created RAID set |
Objects | Allows you to initialize logical drives or change the logical drive |
| parameters |
Rebuild | Allows you to rebuild failed drives |
Check | Allows you to check the data consistency of the logical drives of a created |
Consistency | RAID set |
6.2.1Creating a RAID 0 or RAID 1 set
The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0 or RAID 1 set using two types of configurations: Easy and New.
In Easy Configuration, the logical drive parameters are set automatically including the size and stripe size (RAID 1 only).
In New Configuration, you manually set the logical drive parameters and assign the set size and stripe size (RAID 1 only).
Using Easy Configuration
To create a RAID set using the Easy Configuration option:
1.From the utility main menu, highlight Configure, then press <Enter>.
2.Use the arrow keys to select Easy Configuration, then press <Enter>.
Chapter 6: RAID configuration |