6.4.8Deleting a RAID set
To delete a RAID set:
1.Press <D> from the Configure/View Host RAID Settings menu.
2.For RAID 0 and RAID 10 set, go to step 3. For a RAID 1 set, select a delete option from the menu (see below), then go to step 3.
•Drive ID 1 - Deletes all data on drive 1
•Drive ID 2 - Deletes all data on drive 2
•Drive ID 1 & 2 - Deletes all data on both drives
•None - Breaks the array but keeps all existing data on both drives
3.When prompted, select Yes from the Delete Array? menu, then press <Enter>.
You lose all data on the hard disk drives when you delete a RAID set. Make sure to back up all important data before deleting a RAID set.
4.Press <ESC> to exit the utility.
Chapter 6: RAID configuration |