6.4.3Creating a RAID 0 set (Stripe)

To create a RAID 0 set for Performance:

1.After enabling the HostRAID, the utility returns to the initial menu. Use the arrow keys to select Configure/View HostRAID Settings, then press <Enter>.

2.The utility displays the installed SCSI hard disk drives status and menu options. When available, the HDD status shows Free. Press <C>.

The utility does not display an installed SCSI HDD(s) with an existing RAID condiguration or is part of an existing RAID set. Use the SCSI Disk Utilities to reformat the HDD(s), or use the previous RAID card to clear the RAID configuration on the HDD(s).

6-34

Chapter 6: RAID configuration