For convenient transport, install the roller wheels the came with the system package. Each wheel has a brake lock to stabilize the chassis in place.
To install the chassis wheels:
1.Lay the chassis in its side.
2.Locate the designated screw holes for each of the four wheel sets. Take note of the numbers alongside each hole when placing screws.
3.Secure each wheel to the bottom of the chassis using four screws.
4.Repeat steps 2 and 3 to install the other three wheels.
31
2 4
Remove the chassis roller wheels if you wish to mount the system to a rack.
To remove the chassis wheels:
1.Lay the system chassis on its side.
2.Use a Phillips screwdriver to remove the screws that secure the wheels to the bottom of the chassis.
3.Repeat step 2 to remove the other three roller wheels.
Chapter 2: Hardware setup |