5.4.7 Power On Configuration

This menu shows the power configuration settings. Select an item then press <Enter> to display the configuration options.

PhoenixBIOS Setup Utility

Advanced

Power On Configuration

Item Specific Help

 

 

 

Restore on AC Power Loss

[Last State]

Configures the system state

Power On By PS/2 Keyboard

[Disabled]

after recovering from

power failure.

Power On By PS/2 Mouse

[Disabled]

 

Power On By PME#

[Disabled]

 

Power-On By RTC Alarm

[Disabled]

 

 

 

 

F1

Help

↑↓

Select Item

-/+

Change Values

F9

Setup Defaults

ESC

Exit

→←

Select Menu

Enter

Select Sub-Menu

F10

Save and Exit

Restore on AC Power Loss [Last State]

When set to [Power Off], the system goes into “off state” after an AC power interruption. When set to [Power On], the system turns on automatically after a power interruption. When set to [Last State], the system goes into whatever was the system state (on or off) before the power interruption. Configuration options: [Power Off] [Power On] [Last State]

Power Up By PS/2 Keyboard [Disabled]

Allows you to use specific keys on the PS/2 keyboard to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Enabled] [Disabled]

Power Up By PS/2 Mouse [Disabled]

When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Enabled] [Disabled]

Power On By PME# [Disabled]

Allows you to enable or disable the PME and onboard LAN to generate a wake-up event. Configuration options: [Disabled] [Enabled]

Power On By RTC Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake-up event. Configuration options: [Disabled] [Enabled]

ASUS TS500-E4

5-29