To reinstall the MemCool FB-DIMM fan kit:

1.Locate the three FB-DIMM fan holes on the motherboard.

2.Disengage the fan top cover from the fan base. You can do this by firmly gripping the top cover by the clamps to release the hooks, then pull up the top cover carefully until it separates from the fan base.

Do not remove the fan from the fan base.

3.Position the fan base over the DIMMs, and insert the fan base legs into the FB-DIMM holes until the legs are securely in place.

Top cover

clamp

Top cover hook

Fan base

For instructional purposes only, no FB-DIMM is installed on any of the slots.

ASUS TS500-E4

2-39